
*** This file contains english and russian (at end of file) notes.
***  䠩 ᮤন ᪨  ᪨ ਠ 権

*** English
*** ᪨

                        TopKey for DOS v1.42
                            INSTALLATION

   To install TopKey for DOS on your computer, the following steps 
   must be performed:

      - insert the installation diskette into the drive A or B;

      - make this drive active, using, e.g., the following command:

            C:\DOS>a:

      Note:
         Depending on the carriers used, the TopKey for DOS package 
         may be located either on a separate disk (as in the case 
         above), or in a separate directory, if the disk contains 
         installation packages of other products.

         In this case, the INSTALL program must be run not from the 
         root directory, but from the directory containing TopKey for 
         DOS. In this case, change the directory to the appropriate 
         one:

            A:\>cd topkey.dos

      - choose the disk and directory in which TopKey for DOS will be 
        located (the disk must have at least 400K of free space);

      - type INSTALL or INSTALL disk:\directory in the command line, e.g.:

            INSTALL C:\TOPKEY

      - answer the questions as these will be asked in the process of 
        installation. The program will be offering possible answers, 
        so you will be able to answer all the questions by pressing 
        the ENTER key (to accept the answer offered). In this case, 
        TopKey for DOS will be installed with the standard 
        parameters.

        In editing the answers offered, left and right arrows, 
        backspace, home, end, insert and delete keys can be used.

   The TopKey for DOS package is a multilingual programmable keyboard 
   mapper (driver). If necessary, you can use any screen driver or 
   loader of screen fonts (also called code pages) suitable for you.

   It is expected that your computer is equipped with a EGA or VGA 
   monitor, and DOS contains the DISPLAY.SYS and MODE.COM utilities 
   in the PATH.

   So you can use the standard DOS utilities (DISPLAY.SYS and 
   MODE.COM) to load necessary screen fonts (code pages). In this 
   case, you can use the code pages 900 and 920 included into the 
   TopKey package. (These code pages can replace the code page 866 or 
   the GOST (federal standard) alternative code page for Russian 
   symbols; in addition, they include a symbol set necessary for 
   countries of Northern Europe and Germany, as well as phonetic 
   symbols to write transcriptions).

   If you decide to use the code page 900 or 920, INSTALL will 
   customize DOS as necessary for use of the DISPLAY.SYS display 
   driver. For that, the following line will be added into the 
   C:\CONFIG.SYS file:

        DEVICE=C:\DOS\DISPLAY.SYS CON:=(EGA,437,(1,1))

   (unmodified CONFIG.SYS file will be copied to the directory chosen 
   by you and re-named CONFIG.ETS).

   Loading the TopKey mapper is performed using the XCP.BAT command 
   file located in the directory indicated. Or by the way of adding 
   the following line into AUTOEXEC.BAT:

      CALL <path_to_TopKey>XCP.BAT

   If you start the Norton Commander or another shell from 
   AUTOEXEC.BAT, be sure that XCP is started before this shell.

   TopKey for DOS installed on your computer will occupy 
   approximately 400K of the disk space. You can reduce the occupied 
   space to 35-40 by deleting the documentation files and other 
   files which are not used. Be sure that the following files are 
   retained:

      - CEN.COM
      - TOPKEY.EXE
      - XCP.BAT
      - HOT_KEYS.BAT
      - one of the .DNL files the number of which is equal to the 
        number of the code page used
      - the .KBD files names of which are listed in the retained 
        .DNL file.


    13 Podsosenski Per., Moscow 103062, Russia
    Telephone/fax: +7 (095) 916-3711
    E-Mail: ets@ets.ru

    Contact person: Andrey Makarov   E-Mail: makarov@ets.ru



*** Russian
*** ᪨

                        TopKey for DOS v1.42
                            .


     ⠫樨 TopKey for DOS    室
    믮 ᫥騥 蠣:

      - ⠢ ⠫樮 ᪥  ன⢮ A  B

      - ३   , ਬ, 

            C:\DOS>a:

        ਬ砭:
             ᨬ  ᯮ㥬 ⥫  TopKey for
            DOS  ࠧ  ⤥쭮 ᪥ (ᬮ७
            砩)   ⤥ ⠫, ᫨  ᮤন
            ⠫樮  㣨 த⮢.

             ⮬ 砥 ணࠬ INSTALL  ᪠  
            ୥ ⠫,   ⠫, ᮤঠ饣 TopKey for
            DOS.  ⮬ 砥 ३  ᮮ⢥騩 ⠫:

            A:\>cd topkey.dos

      -    ४,  㤥 ࠧ TopKey for
        DOS ( ᪥     400  ᢮
        ࠭⢠)

      -   INSTALL  INSTALL :\४,
        ਬ:

            INSTALL C:\TOPKEY

      - ᫥⥫쭮 ⢥  ,   
          ⠫樨.  ணࠬ ⠭ 㤥 ।
         ਠ ⢥⮢, ⮬     
         ⢥ ⨥  ENTER (ਭ ।
        ਠ) - ⮣ 㤥 ந ⠭ TopKey for DOS 
        ⠭⭮ 䨣樨 .

         ।஢ । ⢥⮢  ਬ
        ५   ࠢ,  backspace, home, end, insert
         del.

     TopKey for DOS   ணࠬ㥬
    ᪫稪 (ࠩ஬) .  室  
    ᯮ짮  ࠭ ࠩ  稪 ࠭
    ⮢, (⠪ 뢠 묨 ࠭栬)  
    ந.

    ।,    㤮 EGA  VGA
    ஬,  DOS ᮤন ⨫ DISPLAY.SYS  MODE.COM  
    ᪠ PATH.

    ⮬   ᯮ짮 ⠭ ⨫ DOS
    (DISPLAY.SYS  MODE.COM)  㧪 ॡ㥬 ࠭ ⮢
    ( ࠭).  ⮬ 砥   ᯮ짮
    ਫ  TopKey 900-  920-  ࠭. (
     ࠭   866- ࠭ 
    ୠ⨢ ஢   ᪨ ᨬ; ஬ ⮣
       ᨬ, ॡ㥬  ࠭ ୮ ய
     ଠ  䮭᪨ ᨬ   ࠭ਯ樨).

    ᫨   ᯮ짮 900-  920-  ࠭, 
    INSTALL  䨣 DOS ॡ㥬 ࠧ  ᯮ짮
    ࠩ ᯫ DISPLAY.SYS.  ⮣  䠩 C:\CONFIG.SYS 㤥
     ப:

        DEVICE=C:\DOS\DISPLAY.SYS CON:=(EGA,437,(1,1))

    (䠩 CONFIG.SYS,     , 㤥 ᪮஢ 
    ࠭  ⠫   CONFIG.ETS).

    㧪 ᪫稪 TopKey ⢫   
    䠩 XCP.BAT, ࠧ饭  㪠 ४ਨ.   ⥬
      AUTOEXEC.BAT ப:

    CALL <__TopKey>XCP.BAT

    ᫨  ᪠  AUTOEXEC.BAT Norton Commander  
    ,  ᫥, ⮡ XCP ᪠ । ⮩
    窮.

    TopKey for DOS, ⠭   , 㤥 
    ਬ୮ 400 ᪮ ࠭⢠.   ᮪
     ࠭⢮  35-40 㤠 䠩 㬥樨,
     㣨 ᯮ㥬 䠩.   易⥫쭮 ࠭
    ᫥騥 䠩:

        - CEN.COM
        - TOPKEY.EXE
        - XCP.BAT
        - HOT_KEYS.BAT
        -   .DNL 䠩,  ண ᮢ  ஬
          ᯮ㥬  ࠭
        -  .KBD 䠩,   ᫥  ࠭
          .DNL 䠩


    , 103062 ᪢, ᥭ᪨ . 13
    ⥫䮭/䠪: +7 (095) 916-3711
    E-Mail: ets@ets.ru

    ⠪⭮ : ஢ ३   E-Mail: makarov@ets.ru


